Powder silos for mixing plants

Efficient environmental protection dust collection: the silo roof is equipped with a dust collector, which can effectively collect the dust generated during the loading and unloading of powder, avoiding environmental pollution caused by dust escaping.

Safe pressure protection: The setting of pressure safety valve provides reliable safety protection for the silo.

Accurate material level monitoring: The material level indicator can accurately display the stock position of powder in the silo in real time.

Smooth unloading assistance: The installation of the flow-assisting air cushion helps to improve the fluidity of the powder in the silo. When unloading, it can effectively prevent the powder from arching and blocking the unloading port, ensure the unloading process is smooth and unobstructed, improve the unloading efficiency, reduce the downtime due to poor unloading, and ensure the continuity of the production of the mixing plant.

Convenient operation of the valve: the manual butterfly valve is simple and convenient to operate, and can flexibly control the flow of powder in and out of the material.

flexible assembly structure: The powder silo and its supporting steel structure adopt assembly structure, which has many advantages. On the one hand, it is convenient and quick to install, which greatly shortens the construction period and reduces the construction time cost of the mixing plant; on the other hand, it occupies a small area, which can reasonably lay out more storage equipments in the limited site space and improves the utilization rate of the land; furthermore, it is of low construction cost, which provides a more economical solution for the investment and construction of the mixing plant and enhances the competitiveness of the products in the market.

 

Various diameter specifications: the silo diameter ranges from 2.9 - 8.2m, and the suitable silo diameter can be flexibly selected according to the production scale of the mixing plant, site space and the demand for powder storage volume.

Wide range of storage capacity: the storage capacity ranges from 100 to 1000t, which can cover the powder storage requirements from small mixing plants to large concrete production enterprises.

 

Mainly used in concrete mixing plant, it is the key facility for storing powder raw materials in the process of concrete production. In the mixing plant, it is responsible for storing important powdery raw materials such as cement, fly ash, slag powder, expansion agent, etc., which provides a stable supply of raw materials for accurate batching and mixing of concrete. Whether it is a small construction site mixing plant, or a large-scale commercial concrete production enterprises, are inseparable from this efficient and reliable powder storage system, which plays an indispensable role as a bridge in the entire concrete production industry chain.

 

Before installation, make sure that the installation site is level and solid, with enough bearing capacity to support the powder silo and its weight when fully loaded. Carefully check whether the model and specification of the silo are consistent with the layout planning of the mixing plant, and operate in strict accordance with the installation instructions to ensure that the components are installed correctly and firmly connected, especially the installation of the supporting steel structure, to ensure its stability and verticality, to prevent safety hazards caused by improper installation.

Before the first use, the inside of the silo should be completely cleaned, and the installation and function of the key equipments such as dust collector, pressure safety valve, material level indicator, flow-assisting air cushion and manual butterfly valve should be checked to ensure that there is no damage or hidden trouble. Check and clean the feeding pipe to prevent foreign matter from blocking the pipe and affecting the feeding.

During operation, establish a regular inspection system, focusing on checking the dust collection effect of the dust collector, the working status of the pressure safety valve, the accuracy of the material level indicator, the operation of the flow-assisting air cushion and the sealing of the manual butterfly valve.

Long-term out of service or seasonal out of service equipment, before decommissioning the silo should be emptied of powder, the interior of the silo thoroughly cleaned to prevent residual lumps of powder to affect the next use. Conduct a comprehensive inspection and maintenance of all parts of the equipment, do a good job of anti-rust, anti-corrosion treatment, will be wearing parts properly stored.