Assembly steel plate warehouse production introduction

December 02, 2024

Assembly of steel plate silo referred to as assembly silo, it is the mechanical roller and molded into a corrugated plate punching, electric torque wrench through the high-strength bolts connected to the assembly of a kind of steel plate silo.

The wall plate of the assembly silo is corrugated, and the plate is generally galvanized, and its thickness is usually 0.8~4.2mm, and the thickness of the silo wall can be up to 8.4mm at present. most of the corrugated wall plate adopts the roller pressing process, and is mass-produced by the mechanical molding production line, and the production line can automatically make corrugated plates of various specifications.

The advantage of the roll pressing method is that the wave shape is formed one by one, the internal stress can be eliminated, the resilience is small, the quality of the plate produced is better, even if the thicker steel plate can be formed in the molding unit assembly line according to the sequence of a molding.In addition, the molding unit and the uncoiler, leveler, conveyor roller conveyor and hydraulic fixed-foot flying shear and other ancillary equipment can be directly to the coil into the required specifications of the corrugated steel sheet products.

Author:

Ms. boch

E-mail:

davina@bochequipment.com

Phone/WhatsApp:

13937362906