- Built on a standard platform, it skillfully integrates modularization with special design, making the product more economical and applicable while meeting the demands of various special working conditions. This design concept not only can give full play to the advantages of standard modules, but also can be accurately customized for different application scenarios, saving costs for users.
- The torque range is reasonably distributed and carefully designed and optimized to meet the power requirements of the equipment while avoiding the waste of resources caused by over-configuration. And by optimizing the tooth profile trimming and tooth direction trimming, the load distribution is more uniform, which significantly improves the load carrying capacity and ensures the gearbox is stable and reliable in long-term operation.
- A variety of output modes are configured to adapt to different working occasions and installation requirements. Whether it is horizontal output, vertical output or other special angle output requirements, you can find a suitable solution, which improves the versatility and flexibility of the equipment.
- A variety of accessories are available, such as cooling device, lubrication system, protective housing, etc. Users can match according to the actual needs to meet different working environments and functional requirements, which further enhances the cost-effectiveness of the product.
Main technical parameters:
- The torque range is 2-1,400 (kN.m) with a large span, which can provide sufficient and suitable torque output for various conveyors, powder separators and other equipments with different specifications and loads to ensure the normal operation of the equipments.
- The range of speed ratio is between 1.25-450, which provides users with a wide range of speed control options, according to the specific process and material characteristics, to accurately adjust the operating speed of the equipment, to achieve the best working results.
Main application areas:
- In belt conveyor, it provides power for the smooth running of the conveyor belt to ensure that materials can be conveyed efficiently and stably.
- In bucket elevator application, it can precisely control the lifting speed and lifting force to realize the vertical conveying of materials.
- In all kinds of lifting equipment, it provides strong and stable torque for the lifting mechanism to ensure the safety and efficiency of lifting operation.
- In the traveling mechanism, it ensures that the equipment can accurately move to the designated position to meet the needs of the production process.
- In the rotary kiln, it drives the kiln body to rotate stably to ensure that the materials are evenly heated and reacted in the kiln.
- In the powder separator, the rotating speed is precisely adjusted to realize the fine sorting of materials.
- In the mixer, it provides appropriate speed and torque for the mixing blades, so that the materials can be fully mixed.
- In the dryer, it ensures the continuous and stable operation of the equipment to improve the drying efficiency and quality.
Important Tips:
- When installing the gear box for conveyor and powder selector, make sure that the installation foundation is firm and level, and operate in strict accordance with the installation instructions to ensure the installation accuracy and reliability.
- Before installation, carefully check the integrity and quality of the gear box and its accessories to ensure that there are no damages, defects and omissions, and at the same time confirm that the tools and equipment required for installation are complete and in good performance.
- Before operation, fill the appropriate amount of lubricating oil according to the regulations, and check the working condition of the lubrication system to ensure that the lubrication is sufficient and effective.
- During operation, pay close attention to the temperature, sound, vibration, oil pressure and other parameters of the gearbox, once abnormalities are found, it should be immediately shut down for inspection and timely troubleshooting.
- Regularly check the sealing condition of the gearbox, replace the worn or aged seals in time, and prevent the lubricant from leaking and external impurities from entering.
- Regularly maintain the gear box according to the requirements of the maintenance manual, including cleaning, checking the wear and tear of gears and bearings, replacing lubricating oil and wearing parts.
- When stopping for maintenance, the power supply must be cut off first and reliable braking measures must be taken to prevent the equipment from starting accidentally.
- In the harsh working environment, it is necessary to strengthen the protection of the gear box, and regularly clean the dust, debris and oil on the surface to prevent corrosion and damage.
- When repairing and replacing the parts of the gear box, the original genuine parts should be used and the operation should be carried out by professional technicians to ensure its performance and reliability.
- Establish detailed equipment operation and maintenance files to record each inspection, maintenance, repair and parts replacement, to provide a basis for subsequent equipment management and fault diagnosis.
Henan Bocheng Import & Export Trading Co.
Contact Now