Selection of steel plate warehouse need to pay attention to a few points

November 16, 2024

Previously, many products can only be stored in the concrete cement warehouse, rainy and humid, the warehouse will often occur mold, moisture and other phenomena, resulting in a lot of material deterioration, suffered huge losses.Now with the development of science and technology, technology updates, Steel Plate Warehouse can not only solve the traditional warehouse is not ventilated, moisture-proof ability is poor and other shortcomings, but also the use of high-tech technology, the use of advanced technology feeding and discharging, greatly facilitating the management of the enterprise's warehouse.

Nowadays, there are more and more types of steel plate warehouse, so how to choose the steel plate warehouse needed?

Steel plate silos with various types of finished product storage and transportation systems

First, look at the material of steel plate warehouse, general steel plate warehouse is the choice of universal steel plate, such as Q235, because the cost of this kind of steel is lower, if the thickness of the wall of the steel plate warehouse exceeds the machine's ability to process it, XuanTong low alloy will replace the original q235. in addition, the steel plate warehouse generally rely on the galvanization to maintain the corrosion requirements, so the galvanized layer has become a determinant of the service life of the steel plate warehouse, the domestic and international requirements on the amount of galvanization are the same, are 400g/㎡.Domestic and foreign requirements for the galvanization of steel plate warehouse are the same, are 400g/㎡.

Second, choose the type of steel plate warehouse production, Lipu warehouse: hot-dip galvanized coil continuous bite edge molding, the color is more uniform; high airtightness, can store water, oil and other liquid materials; due to the warehouse wall is smooth, the required thickness is larger than the assembly warehouse.Assembled steel plate warehouse: this steel plate warehouse is easy to install and save time, not subject to the construction season should be, and can be disassembled and transported.

Third, choose the bottom of the steel plate warehouse: steel plate warehouse bottom is generally divided into two kinds of flat bottom and cone low.Flat-bottomed silo is suitable for ordinary large-diameter silo, this silo bottom cost is low; cone low silo: this silo bottom is to be considered out of the grain self-flowing, it is divided into full steel cone, half-steel cone, cement cone three kinds.

Author:

Ms. Davina

E-mail:

davina@bochequipment.com

Phone/WhatsApp:

+852 59360273